SanDisk Extreme & Extreme PRO microSDXC Performance

We took a brief look at the history of SD / mini-SD / micro-SD cards in the previous section. Similar to SDXC, we have UHS-I and UHS-II interfaces for the microSDXC cards also. SanDisk bundles appropriate adapters with the microSDXC cards. While the UHS-I Extreme card gets a simple full-sized SDXC adapter, the UHS-II Extreme PRO comes with a compact USB 3.0 microSDXC UHS-II reader.

The Extreme PRO microSDXC UHS-II card comes in 64GB and 128GB, while the Extreme microSDXC UHS-I card has 32GB, 64GB, 128GB, and 256GB capacity points. We look at the performance of the 128GB versions in this section.

Sequential Accesses

SanDisk claims speeds of up to 275 MBps for the Extreme PRO UHS-II and 100 MBps for the Extreme UHS-I cards, but real-world speeds are bound to be lower. In fact, writes can sometimes be much slower. For most applications, that really doesn't matter as long as the card is capable of sustaining the maximum possible rate at which the camera it is used in dumps data. We use fio workloads to emulate typical camera recording conditions. We run the workload on a fresh card, and also after simulating extended usage. Instantaneous bandwidth numbers are graphed. This gives an idea of performance consistency (whether there is appreciable degradation in performance as the amount of pre-existing data increases and / or the card is subject to wear and tear in terms of amount and type of NAND writes). Further justification and details of the testing parameters are available here.

Both cards show great performance consistency in the fresh state. Users can expect sustained writes of around 110 MBps and 60 MBps for the Extreme PRO and the Extreme respectively. Reads are much higher at 230 MBps and 95 MBps. The numbers after extended use are very similar, but, there is a bit of consistency loss. In the default state, the ADATA Premier ONE UHS-II card delivers much better write performance, but, in the extended usage state, the Premier ONE's performance is halved, while the Extreme PRO doesn't show any significant degradation. On the other hand, the Lexar UHS-II card seems to be the overall winner both in terms of consistency as well as raw numbers.

AnandTech DAS Suite - Performance Consistency

The AnandTech DAS Suite involves transferring large amounts of photos and videos to and from the storage device using robocopy. This is followed by selected workloads from PCMark 8's storage benchmark in order to evaluate scenarios such as importing media files directly into multimedia editing programs such as Adobe Photoshop. Details of these tests from the perspective of memory cards are available here.

In this subsection, we deal with performance consistency while processing the robocopy segment. The graph below shows the read and write transfer rates to the memory card while the robocopy processes took place in the background. The data for writing to the card resides in a RAM drive in the testbed. The first three sets of writes and reads correspond to the photos suite. A small gap (for the transfer of the videos suite from the primary drive to the RAM drive) is followed by three sets for the next data set. Another small RAM-drive transfer gap is followed by three sets for the Blu-ray folder. The corresponding graphs for similar cards that we have evaluated before is available via the drop-down selection.

The Extreme PRO seems to be well-optimized for general usage also. The Extreme, as well as the ADATA Premier ONE show some of their shortcomings when dealing with a large number of small files with different sizes. The Lexar card and the SanDisk Extreme PRO show similar performance.

AnandTech DAS Suite - Bandwidth

The average transfer rates for each workload from the previous section is graphed below. Readers can get a quantitative number to compare the SanDisk Extreme PRO microSDXC UHS II 128GB uSD card and the Extreme microSDXC UHS I 128GB uSD card against the ones that we have evaluated before.

robocopy - Photos Read

robocopy - Photos Write

robocopy - Videos Read

robocopy - Videos Write

robocopy - Blu-ray Folder Read

robocopy - Blu-ray Folder Write

We also look at the PCMark 8 storage bench numbers in the graphs below. Note that the bandwidth number reported in the results don't involve idle time compression. Results might appear low, but that is part of the workload characteristic. Note that the same testbed is being used for all memory cards. Therefore, comparing the numbers for each trace should be possible across different cards.

robocopy - Photoshop Light Read

robocopy - Photoshop Light Write

robocopy - Photoshop Heavy Read

robocopy - Photoshop Heavy Write

robocopy - After Effects Read

robocopy - After Effects Write

robocopy - Illustrator Read

robocopy - Illustrator Write

Performance Restoration

The traditional memory card use-case is to delete the files on it after the import process is completed. Some prefer to format the card either using the PC, or, through the options available in the camera menu. The first option is not a great one, given that flash-based storage devices run into bandwidth issues if garbage collection (processes such as TRIM) is not run regularly. Different memory cards have different ways to bring them to a fresh state.Based on our experience, uSD cards have to be formatted using the SD Formatter tool from the SD Association (after all the partitions are removed using the 'clean' command in diskpart).

In order to test out the effectiveness of the performance restoration process, we run the default sequential workloads in CrystalDiskMark before and after the formatting. Note that this is at the end of all our benchmark runs, and the card is in a used state at the beginning of the process. The corresponding screenshots for similar cards that we have evaluated before is available via the drop-down selection.

Both cards show negligible performance benefits from refreshing / reformatting. Obviously, reformats will help in avoiding the occassional performance dips that we observed in the sustained writes / reads after subjecting the card to extended use.

SanDisk Extreme PRO SDXC Performance SanDisk Extreme PRO CompactFlash Performance
Comments Locked

21 Comments

View All Comments

  • peevee - Wednesday, November 8, 2017 - link

    Very useful, thanks!
  • ET - Wednesday, November 8, 2017 - link

    How do you explain the Extreme MicroSD's write performance in apps? Caching? It's way ahead of the pack for application use and costs a fraction of the Pro's price.
  • ganeshts - Wednesday, November 8, 2017 - link

    Yes, it was anomalous, and I have to say caching was responsible. I repeated the test sequence thrice with testbed resets inbetween, but the numbers were always similar. Unfortunately, without any way to confirm caching as the issue, I couldn't mention that in the review text.

    Also, note that the Extreme microSD is A1-class, and other microSD cards weren't optimized for the new performance class. So, the controller firmware could be responsible too.
  • imaheadcase - Wednesday, November 8, 2017 - link

    I had to get one of these Extreme Pro versions for my 1080p 60fps camera. Even with it i get the dreaded "writing data to disk please wait" shown on camera when using it.

    I suspect SD cards for video are going to be replaced by something else like a pure micro SSD.
  • imaheadcase - Wednesday, November 8, 2017 - link

    Speaking of memory cards, do you know why you can't read multiple ones at a time in win 10? Also how come you can't by a reader for multiple ones at a time? You can by hundreds of those "all-in-one" doggles but can only read one at a time in windows 10 for some reason..
  • DanNeely - Wednesday, November 8, 2017 - link

    Is it just a W10 issue, or are you limited the same way in other OSes?
  • imaheadcase - Thursday, November 9, 2017 - link

    No other OS to try on. But I'm not sure when Win10 would even do this. Unless for some reason its not allowed simply because of saturated bandwidth if more than one.
  • ddrіver - Sunday, November 12, 2017 - link

    For me it works fine. My preactivated ISO has some extra mods and stuff integrated so maybe that fixes it...
  • "Bullwinkle J Moose" - Wednesday, November 8, 2017 - link

    With the lack of information you provided, we could only guess

    Are you trying to read 2 cards from a single USB port or hub?
    That would be a problem

    Have you tried 2 separate card readers on two independent USB ports?
  • "Bullwinkle J Moose" - Wednesday, November 8, 2017 - link

    Yes, you CAN buy hundreds of all-in-one dongles but you can only read one card at a time on a single port!

Log in

Don't have an account? Sign up now