Refresh Rate Handling - 23.976 Hz Works!

Readers following our HTPC reviews know by now that Intel's 23 Hz issue was left unresolved in Ivy Bridge. It is definitely better than the Clarkdale days, as users no longer get 24 Hz when setting the display refresh rate to 23 Hz (23.976 Hz intended). However, the accuracy is not enough to prevent a frame drop every 4 minutes or so (the 23 Hz setting results in a display refresh rate of 23.972 Hz in Ivy Bridge). One of the first things I checked after building the Haswell HTPC was the 23 Hz setting. The good news is that the display refresh rate accuracy is excellent.

Even better news is that the set of display refresh rates obtained with the Haswell system is more accurate than anything I had obtained before with AMD or NVIDIA cards. The gallery below presents some of the other refresh rates that we tested out. madVR reports frame drops / repeats only once every 6 hours or more in the quiescent state.

Unfortunately, Intel still doesn't provide a way to easily configure custom resolutions (in fact, the latest driver release seems to have removed that option completely. Update: A reader pointed out that the feature is still available as CustomModeApp.exe in the drivers folder, but long time users still miss access to it from the main control panel). I know for a fact that my Sony display (KDL46EX720) does support 25 Hz and 50 Hz refresh rates, but Intel doesn't allow those to be configured. We are willing to cut Intel some slack this time around because they have finally resolved a bug that was reported way back in 2008.

Video Post Processing and HTPC Configuration Options Decoding and Rendering Benchmarks
Comments Locked

95 Comments

View All Comments

  • jhoff80 - Sunday, June 2, 2013 - link

    This article and the power consumption stats just make me wish that Intel would just make it easier to get a hold of their -T chips for end users. A 35W or 45W chip would be great for me, but the only thing that has full retail availability is the 65W one. (And it's not because it's so early in launch, it's always been way too difficult to get -T versions.)
  • EnzoFX - Sunday, June 2, 2013 - link

    Not to mention expensive! You get the same results by undervolting/underclocking, typically.
  • Laststop311 - Monday, June 3, 2013 - link

    You are correct in a way but you could undervolt the T series as well and get better thermal performance then the 65 watt version. atleast that is my experience. If i was making an HTPC i would use the i7-4770t or the i7-4650t if thats the equivalent of the i7-3770t this year. The power consumption is amazing and proper 24hz is great for 1080p24 playback. upgrade to the htpc just isn't in my budget right now and ivy bridge + gt 660 isnt a bad htpc. MY PC budget is going to an ultrabook upgrade this year. The increased battery life and performance is insane. i7-980x desktop still does not have a large enough upgrade to make it worth it. Ivy bridge-E is not THAT much faster and I dont think even haswell-e next year will be enough to upgrade the desktop.
  • Death666Angel - Tuesday, June 4, 2013 - link

    "but you could undervolt the T series as well and get better thermal performance then the 65 watt version."
    Not to the same extent. The T series will already be driving much tighter voltages than normal SKUs. While you may save 15% power consumption by undervolting normal SKUs, undervolting already power efficient SKUs would result in sub 5% probably.
  • vnangia - Sunday, June 2, 2013 - link

    Well, it helps that there are 35W parts this time around - at least on the timeline. IVB didn't get any 35W parts, so the HTPC is still on SNB, and yeah, I could definitely use the incremental improvements to QuickSync.
  • jhoff80 - Sunday, June 2, 2013 - link

    Yes, but I'm not talking about only 35W specific chips. The i7-3770T was just as difficult to get as any other -T series chip, because they don't sell them to end-users directly.
  • vnangia - Sunday, June 2, 2013 - link

    I'm agreeing with you! What I was trying to say is, Intel did announce low-TDP SNB parts and delivered: SNB had a bunch of -T versions available to end-users at both low (G4xx, G5xxT, 2100T, 2120T) and high end (2390, 2500T). I bought my 2100T at Microcenter B&M for instance.

    By contrast, Intel didn't announce any end-user -T (and just a handful of -S) parts and we saw that IVB had virtually no -T parts available. I'm optimistic that now they've announced a few -T parts at the high end, we might actually see these materialize in the retail chain and hopefully it bodes well for -T parts at the low end.

    Fortunately (*knocks on wood*) the current SNB-based HTPC is still going strong, so I don't feel the need to upgrade. If and when I do, though, I expect that it won't be so clear cut - I may end up going with AMD's lineup, despite the relative paucity of AMD ITX boards.
  • jhoff80 - Monday, June 3, 2013 - link

    Sorry, I must've misunderstood.
  • Krysto - Monday, June 3, 2013 - link

    This is insane. Why use a $400 Intel Haswell media box for 4k video, when you can use the much cheaper and much more efficient Mali T622-based media boxes that should be appearing next year?

    http://blogs.arm.com/multimedia/977-a-new-branch-f...
  • NirXY - Monday, June 3, 2013 - link

    "should be appearing next year"

Log in

Don't have an account? Sign up now