Fractal Design Define R3: A Fan Favorite Keeps the Noise Down
by Dustin Sklavos on November 11, 2011 1:22 AM EST- Posted in
- Cases/Cooling/PSUs
- mid-tower
- Fractal Design
Conclusion: An Awful Lot to Like
After going through the testing, it's pretty easy for me to understand why so many of you are big proponents of the Fractal Design Define R3. The kit on offer here has a design that's both elegant and practical, and its ability to serve users who want a quiet computer and/or a high performance computer without making any major compromises either way is a major coup.
By and large I'm a big fan of how the R3 looks. The door is going to be a matter of taste (I don't personally care for having a door on the front of my tower, but some people do, and it does keep noise in), but Fractal Design at least keeps the buttons and I/O outside the enclosure, on the top. I know some of you are going to be at least a little peeved by the lack of USB 3.0 connectivity in that I/O cluster; that's an update that Fractal Design will hopefully include in a revision down the line. And it may seem a little silly, but I really like how the removable acoustic pads block off the unused fan grills. Unoccupied grates for fans can be a bit of an eyesore, so covering them up internally goes a long way towards alleviating that problem.
If the R3 has a real shortcoming, it's the internal design. While the inside is about spacious enough (even a bit cozy), the holes in the motherboard tray just don't seem to line things up quite right, and so the build isn't able to be as clean as you'd want it to be. Routing cables is harder than it ought to be, and the hole for the AUX 12V cable just seems goofy. In the grand scheme of things this is probably a minor quibble, but it sticks out so much because it would be so easy to fix.
I'd say if you're going to be putting together a high performance, heavily overclocked machine, you'll want to add an intake fan or two in strategic places. For something more basic, the stock configuration should be more than adequate, and will definitely be able to keep the noise down. Given the choice between the NZXT H2 and the Fractal Design Define R3, it's easy to recommend the R3. Between the Antec Solo II and the R3, I'd give the edge to the R3, but there are reasons (mainly aesthetic) to go with the Solo II instead.
Ultimately, though, for silent computing in the $100 range, it's hard not to recommend the Fractal Design Define R3. You asked for the review, and you were right: it really is an excellent case.
Update: Fractal Design has informed me that USB 3.0 versions of their enclosures, including the Define R3 and Define XL, are selling on NewEgg and NCIX. So much for that complaint!
Facebook
Twitter
RSS
83 Comments
View All Comments
magnetik - Friday, November 11, 2011 - link
This might be just the case that I use for my new Sandy Bridge-E buildsharpless78 - Friday, November 11, 2011 - link
They have already upgraded the Define R3 to USB3, and there's also a upgrade kit available.tzhu07 - Friday, November 11, 2011 - link
Do they offer it for free to existing R3 owners or you pay a small cost?sharpless78 - Friday, November 11, 2011 - link
Sorry to say, it is not for free.darckhart - Friday, November 11, 2011 - link
typical. early adopters get the shaft while drumming up sales.lesbaer45 - Friday, November 11, 2011 - link
Thus life's lesson #1034: Don't be an early adopter. You'll get the shaft.V3.0 owns V1.0. Every. Damn. Time.
Sabresiberian - Friday, November 11, 2011 - link
Well, the people who bought the case earlier and like it got to use the case and enjoy it sooner, so I wouldn't exactly call that "getting the shaft".If you wait to buy something until it's perfect, you'll never buy anything, and do without. Do you want it, or not? If it serves your purpose when you buy it, it's a good thing, no matter how much better the improved version is that comes along afterward.
;)
piroroadkill - Monday, November 14, 2011 - link
Oh no, a first world problem! I have to reach around the back to plug my USB 3 device instead of having a port at the front! OH NO!icebox - Friday, November 11, 2011 - link
I need to upgrade my home nas from an aging socket A shuttle PC. I was looking at this case for the new machine.Since you tested it how do you feel it will behave with all the drive bays occupied? Will it have space for intake fans if I fill all the drive bays?
Cooling will be important for the drives and less for the motherboard / video card because it will obviously be a low power fusion / atom board.
Thanks for the great review!
slacr - Friday, November 11, 2011 - link
I use the R2 (previous generation) of this case for a HTPC/NAS/webserver/voicechatserver setup based on my old intel Q6600, currently stocked with 4 harddrives, an aging Seagate 250gb and 3 2TB samsungs.Temperatures are currently 39, 33, 33, 32
Other components run at:
CPU Temperature: +43.0°C (high = +60.0°C, crit = +65.0°C)
MB Temperature: +36.0°C (high = +45.0°C, crit = +55.0°C)
SB Temperature: +50.0°C (high = +65.0°C, crit = +95.0°C)
NB Temperature: +55.0°C (high = +65.0°C, crit = +95.0°C)
In my case i use 2 of fractals fans in the front, one hanging askew over RAM/CPU/NB/GPU and one in the back all running at 5V for a really quiet setup.
I won't hesitate to add more drives when i need them, the only issue is the older 7200 rpm 250gb drive that is running slightly on the hot side.