Fractal Design Define R3: A Fan Favorite Keeps the Noise Down
by Dustin Sklavos on November 11, 2011 1:22 AM EST- Posted in
- Cases/Cooling/PSUs
- mid-tower
- Fractal Design
Testing Methodology
For testing ATX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.
| Full ATX Test Configuration | |
| CPU |
Intel Core i7-875K (95W TDP, tested at stock speed and overclocked to 3.8GHz @ 1.38V) |
| Motherboard | ASUS P7P55D-E Pro |
| Graphics Card | Zotac NVIDIA GeForce GTX 580 (244W TDP) |
| Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
| Drives |
Kingston SSDNow V+ 100 64GB SSD Western Digital Caviar Black 1TB SATA 6Gbps Samsung 5.25" BD-ROM/DVDRW Drive |
| CPU Cooler | Zalman CNPS9900 MAX with Cooler Master ThermalFusion 400 |
| Power Supply | SilverStone Strider Gold 750W 80 Plus Gold |
A refresher on how we test:
Acoustic testing is standardized on a foot from the front of the case, using the Extech SL10 with an ambient noise floor of ~32dB. For reference, that's what my silent apartment measures with nothing running, testing acoustics in the dead of night (usually between 1am and 3am). A lot of us sit about a foot away from our computers, so this should be a fairly accurate representation of the kind of noise the case generates, and it's close enough to get noise levels that should register above ambient.
Thermal testing is run with the computer having idled at the desktop for fifteen minutes, and again with the computer running both Furmark (where applicable) and Prime95 (less one thread when a GPU is being used) for fifteen minutes. I've found that leaving one thread open in Prime95 allows the processor to heat up enough while making sure Furmark isn't CPU-limited. We're using the thermal diodes included with the hardware to keep everything standardized, and ambient testing temperature is always between 71F and 74F. Processor temperatures reported are the average of the CPU cores.
For more details on how we arrived at this testbed, you can check out our introductory passage in the review for the IN-WIN BUC.
Last but not least, we'd also like to thank the vendors who made our testbed possible:
Thank You!
We have some thanks in order before we press on:
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory we used to add memory thermals to our testing.
- Thank you to Zalman for providing us with the CNPS9900 MAX heatsink and fan unit we used.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Western Digital Caviar Black hard drive, Intel Core i7-875K processor, ASUS P7P55D-E Pro motherboard, and Samsung BD-ROM/DVD+/-RW drive.
- And thank you to SilverStone for providing us with the power supply and SATA power cable.
Facebook
Twitter
RSS
83 Comments
View All Comments
magnetik - Friday, November 11, 2011 - link
This might be just the case that I use for my new Sandy Bridge-E buildsharpless78 - Friday, November 11, 2011 - link
They have already upgraded the Define R3 to USB3, and there's also a upgrade kit available.tzhu07 - Friday, November 11, 2011 - link
Do they offer it for free to existing R3 owners or you pay a small cost?sharpless78 - Friday, November 11, 2011 - link
Sorry to say, it is not for free.darckhart - Friday, November 11, 2011 - link
typical. early adopters get the shaft while drumming up sales.lesbaer45 - Friday, November 11, 2011 - link
Thus life's lesson #1034: Don't be an early adopter. You'll get the shaft.V3.0 owns V1.0. Every. Damn. Time.
Sabresiberian - Friday, November 11, 2011 - link
Well, the people who bought the case earlier and like it got to use the case and enjoy it sooner, so I wouldn't exactly call that "getting the shaft".If you wait to buy something until it's perfect, you'll never buy anything, and do without. Do you want it, or not? If it serves your purpose when you buy it, it's a good thing, no matter how much better the improved version is that comes along afterward.
;)
piroroadkill - Monday, November 14, 2011 - link
Oh no, a first world problem! I have to reach around the back to plug my USB 3 device instead of having a port at the front! OH NO!icebox - Friday, November 11, 2011 - link
I need to upgrade my home nas from an aging socket A shuttle PC. I was looking at this case for the new machine.Since you tested it how do you feel it will behave with all the drive bays occupied? Will it have space for intake fans if I fill all the drive bays?
Cooling will be important for the drives and less for the motherboard / video card because it will obviously be a low power fusion / atom board.
Thanks for the great review!
slacr - Friday, November 11, 2011 - link
I use the R2 (previous generation) of this case for a HTPC/NAS/webserver/voicechatserver setup based on my old intel Q6600, currently stocked with 4 harddrives, an aging Seagate 250gb and 3 2TB samsungs.Temperatures are currently 39, 33, 33, 32
Other components run at:
CPU Temperature: +43.0°C (high = +60.0°C, crit = +65.0°C)
MB Temperature: +36.0°C (high = +45.0°C, crit = +55.0°C)
SB Temperature: +50.0°C (high = +65.0°C, crit = +95.0°C)
NB Temperature: +55.0°C (high = +65.0°C, crit = +95.0°C)
In my case i use 2 of fractals fans in the front, one hanging askew over RAM/CPU/NB/GPU and one in the back all running at 5V for a really quiet setup.
I won't hesitate to add more drives when i need them, the only issue is the older 7200 rpm 250gb drive that is running slightly on the hot side.