P67 $190 Part 2: MSI P67A-GD65, ASRock P67 Extreme6 and ECS P67H2-A2
by Ian Cutress on May 10, 2011 1:36 AM EST- Posted in
- Motherboards
- MSI
- ASRock
- P67
- ECS
- Cougar Point
ASRock P67 Extreme6: Board Features
ASRock P67 Extreme6 | |
Market Segment | Performance |
CPU Interface | LGA 1155 |
CPU Support | i3/i5/i7 Sandy Bridge |
Chipset | P67 |
Base Clock Frequency | 95.0 MHz to 110.0 MHz in 0.1 MHz intervals |
DDR3 Memory Speed | 1333 MHz by default, 1067-2133 MHz supported |
Core Voltage | Auto, offset or fixed modes, 0.600 V to 1.700 V in 0.005 V intervals |
CPU Clock Multiplier | Dependent on CPU |
DRAM Voltage | Auto, 1.200 V to 1.800 V in 0.015V intervals |
DRAM Command Rate | Auto, 1T or 2T |
Memory Slots |
Four 240-pin DDR3 DIMM slots in dual-channel Regular unbuffered DDR3 memory Up to 32GB total supported |
Expansion Slots |
3 x PCI Express 2.0 x16 slots (x16/x0/x4 or x8/x8/x4) 2 x PCI Express 2.0 x1 slot 2 x PCI slots Supports ATI Crossfire Supports NVIDIA SLI |
Onboard SATA/RAID |
2 x SATA 6.0 Gb/s ports (white) 4 x SATA 3.0 Gb/s ports (blue) supporting RAID 0/1/5/10 4 x SATA 6.0 Gb/s ports (white) from Marvell 9120 1 x eSATA 6.0 Gb/s ports from shared Marvell 9120 |
Onboard |
4 x SATA 3Gb/s connectors 6 x SATA 6Gb/s connectors 6 x Fan Headers (2x4-pin, 4x3-pin) 4 x USB 2.0 headers support additional 8 USB 2.0 Ports 1 x USB 3.0 header supports additional 2 USB 3.0 Ports 1 x Power on button 1 x Reset button 1 x Front panel switch/LED header 1 x Floppy connector 1 x IR header 1 x COM port header 1 x HDMI_SPDIF header 1 x Firewire/IEEE 1394 header 1 x Front panel audio header 1 x Debug LED Display |
Onboard LAN | Dual Realtek® RTL8111E Gigabit Fast Ethernet Controllers with Teaming |
Onboard Audio | Realtek® ALC892 8-Channel HD Audio |
Power Connectors |
24-pin EATX Power connector 8-pin EATX 12V Power connector |
Fan Headers |
2 x CPU Fan (4-pin, 3-pin) 3 x CHA Fan (4-pin, 2x3-pin) 1 x PWR Fan (3-pin) |
IO Panel |
2 x PS/2 keyboard & PS/2 mouse connectors 2 x RJ45 LAN connectors 1 x Audio port (Line-in, Line-out, Mic-in) 1 x Optical S/PDIF Out connector 1 x Coaxial S/PDIF Out connector 1 x Clear_CMOS button 1 x IEEE 1394 port 4 x USB 3.0 ports compatible to both USB 3.0/2.0 devices (blue) 1 x eSATA 6.0Gb/s ports 4 x USB 2.0 ports |
BIOS Version | 1.6 |
Warranty Period | 2 Years |
Nothing ultimately stands out here, apart from the 10 SATA ports total with six SATA 6 Gbps ports on offer, as well as six fan headers.
ASRock P67 Extreme6: In The Box
- 2-slot SLI Bridge
- I/O Shield
- Floppy Cable
- 6 x locking SATA Cables (3 x right-angled)
- 4-pin molex to SATA power cable
- Front USB 3.0 Panel w/ SSD holder with rear USB 3.0 bracket
The ASRock USB 3.0 panel that holds an SSD that would retail at $15+ makes an appearance here, as well as plenty of locking SATA cables.
ASRock P67 Extreme6: Software
The software on offer here is identical to that seen on the Extreme4, with XFast USB, Instant Boot and the Extreme Tuning Utility. Check out the software in our Extreme4 review here.
Gallery: ASRock P67 Extreme6 Software
27 Comments
View All Comments
S0me1X - Tuesday, May 10, 2011 - link
Can you shed some light as to exactly what this does? There is talk of its effects but not what it is actually doing.IanCutress - Tuesday, May 10, 2011 - link
Intel haven't released this information in an easy to read format, as far as I can tell - speculation is rife that it's to do with boosting the frequency signal to the CPU just that it's easier to distinguish between high and low states when you have a high overclock (PLL stands for 'Phase Lock Loop'). The downside of enabling this feature (and is a known problem) is that there are issues coming back from Sleep states.All the best,
Ian
GTVic - Tuesday, May 10, 2011 - link
A Phase Locked Loop is designed to keep something on frequency, counteracting external forces which would otherwise cause a frequency drift. I believe the voltage levels on the CPU are controlled by the frequency of the Pulse Width Modulation so I'm guessing that this "Internal PLL Overvoltage" circuit allows the CPU to auto-manage the voltage levels required at various levels of overclock. If it needs more voltage, it gets more. As opposed to a table of preset voltage levels for various overclock frequencies which would not be optimal for all CPU chips in all environments.bf71090 - Tuesday, May 10, 2011 - link
I don't think you were clear with the warranty information for the Asrock. As far as I can tell any p67/h67 board you buy today until June 30th will automatically have a 2 year warranty.IanCutress - Tuesday, May 10, 2011 - link
I just double checked with ASRock, and all high end motherboards are two years warranty (with ASRock), while other motherboards come with a one year warranty.All the best,
Ian
IanCutress - Monday, May 16, 2011 - link
Must clarify - it's other ASRock boards that have the one year.H8ff0000 - Tuesday, May 10, 2011 - link
Can you guys please review the P67 Sabertooth? I'd like to know where you guys think it stands in relation to these.nightmare9920 - Tuesday, May 10, 2011 - link
It depends on the region, in europe the standard warranty is 2 years with 3 years on some of the high end boards. I believe in NA it is 1 year as standard and 2 on the high end boards.
Arbie - Tuesday, May 10, 2011 - link
A feature important to me is fan headers and controls. I want to know how many headers there are, what electrical type (3-pin or 4-pin), and what the BIOS will actually do with them (manually set speed, or have it control on thermal inputs).This kind of info is often hard to find - sometimes impossible without buying the board. So getting this from someone who has actually used the board would be ideal.
However, reviewers usually give fan controls short shrift, possibly because they are not putting the boards in cases. And I realize that, especially on a multi-board roundup, you can't go into such detail on each one. So - where it's available - maybe you could include a link to the mobo user's manual.
Thx
Arbie
michaelheath - Tuesday, May 10, 2011 - link
I appreciate the review, however I think tech writers are sensationalizing the 'fiasco that was Cougar Point' a bit too much. Yeah, it kinda sucked for the early adopters (and I say that with full sympathy, having been there before myself). For a person who's patient and waited for all the kinks and bugs to be ironed out, the fact that there was a release, a recall, and then a re-release may not weigh on their mind at all when making a purchasing decision. Personally, I'm waiting to see what Z68 does and then pulling the trigger, and I'll gladly buy a P67 board if it's the better option.