A Budget Home Theater & PC Setup: 4K, HDR, UHD Blu-ray, and More
by Ganesh T S on December 26, 2017 8:30 AM ESTConfiguring a UHD Blu-ray Playback System
The rise in popularity of OTT streaming has coincided with a decline in the popularity of physical media formats such as Blu-rays. Irrespective of the market statistics, it is indisputable that the bitrates possible with the latter simply can't translated to OTT services. Bitrates usually directly correlate with video quality, though, beyond a certain point, it becomes very difficult to distinguish. HD audio formats such as Dolby Atmos, DTS-HD MA, Dolby TrueHD etc. are also yet to be widely adopted by OTT streaming services. On top of all these, Blu-rays are often treated as collectibles by some consumers.
UltraHD (UHD) Blu-rays (with their 4K resolution videos encoded in HEVC) were a bit slow to take off. On the PC front, the number of licensed software Blu-ray player vendors has come down from 3 (ArcSoft, Corel, and CyberLink) to just CyberLink alone. PowerDVD 17, with UHD Blu-ray support, was released in April 2017. The hardware requirements were quite specific, and we decided to pass up on a hands-on review at that time.
While reviewing the Intel NUC7i7BNH, I realized that it came with support for SGX, one of the primary requirements for PowerDVD 17 to play back UHD Blu-rays. I also remembered that the BIOS of the ASRock Beebox-S 7200U had a SGX option. Both of these systems also had a LSPCon on board to support HDMI 2.0 with HDCP 2.2 capability. Pioneer launched the BDR-211UBK in March, but, had specifically indicated that KBL-U was incompatible. However, based on our discussions with both CyberLink and Intel, we decided to give the drive a try by connecting the internal SATA ODD using a compact SATA-USB bridge.
The Pioneer BDR-211UBK and the UGREEN SATA-USB Adapter Combine to Make the Intel NUC7i7BNH a UHD Blu-ray Player
We looked up Amazon for a compact bridge and chanced upon a versatile UGREEN adapter. In addition to supporting the SATA drive, it also had a couple of USB 3.0 Type-A extension ports and a microSD reader. This made sure that the optical drive would not completely take over the USB port in the host system.
Using an Internal Drive without an Enclosure is not an Issue if the Setup is Tucked Out-of-Sight
After setting up the hardware and configuring the BIOS appropriately in the two systems, we installed the Management Engine components. The next step was to confirm that the system and allied components were correctly set up for UHD Blu-ray playback with HDR. CyerbLink provides the Ultra HD Blu-ray Advisor tool for this purpose. It also helpfully points out missing ME components or mis-configured BIOS options. Even though we were aware that the Zotac ZBOX MAGNUS EN1080K doesn't pass the requirements check (no SGX, iGPU inactive), we did try out the tool on it also.
The CyberLink Ultra HD Blu-ray Advisor (L: ASRock Beebox-S 7200U, R: Zotac ZBOX MAGNUS EN1080K)
Even though it is possible that the Zotac EN1080K might enable SGX in a future BIOS release, the use of the Intel GPU is probably disabled at the board level. This means that there is no protected audio/video path for secure decoding of the UHD Blu-ray streams. Given that there is no talk of UHD Blu-ray support from NVIDIA Pascal, consumers shouldn't keep their hopes up regarding the possibility of UHD Blu-rays getting played back on NVIDIA Pascal-equipped systems. Coming back to the results of the UHD BD Advisor tool, we find that the two KBL-U systems pass all the checks. We purchased a retail copy of the Planet Earth II UHD Blu-ray for testing out our setup.
Facebook
Twitter
RSS
191 Comments
View All Comments
ebilg - Tuesday, December 26, 2017 - link
To avoid all the headaches with UHD Bly-rays you could just get an Xbox instead. The studios don't seem to care about 4K Blu-ray on PCs. Plus the Xbox also does Hulu in 4K.ddrіver - Tuesday, December 26, 2017 - link
It's obvious the "budget setup" isn't actually a budget setup because the guy just accepts to be "sponsored" with equipment that blows any budget: it goes from ~$470 to ~$1000. That's over $500 extra. On a budget! So who cares about the BR player? It can just be sponsored by somebody.@GaneshTS & AT what other budget builds can you do with expensive sponsored stuff? I was thinking on an article on how to get free gaming builds... from your parents.
ganeshts - Tuesday, December 26, 2017 - link
Dude, seriously? The only equipment that was sponsored was the Denon AVR, and it was clearly specified. Everything else was out of my own pocket (other than the PCs that come in for review on a revolving basis)ddrіver - Tuesday, December 26, 2017 - link
That wasn't about getting hidden stuff or anything like that. It was about adding $500 and still calling it a budget build. A $1000 receiver isn't part of any budget build. It doesn't make sense.Gasaraki88 - Wednesday, December 27, 2017 - link
So you want a home theater system but don't want to get an AV receiver? You complaining about a $500 receiver? That's the cheapest you can get that supports DV passthrough and all the other new tech. If you don't want good sound you don't need a receiver so you can subtract that out but then it not a "Home Theater" then.Icehawk - Wednesday, December 27, 2017 - link
Not even remotely true, plenty of recievers in the ~$400 range offer the sams functions. After my last two $800+ recievers crapped out after two years I will no longer put my money in them.Crazyeyeskillah - Thursday, December 28, 2017 - link
You are completely out of touch with your readers. There are plenty of options on the market that will deliver a great experience without dumping $500 into a receiver. While it's fun to piss away money on a home theater system, you don't have to blow all your money on something that won't give a perceivable benefit whatsoever to the average consumer. The extra $500 could make up the difference towards a 55" OLED display, or an entry level projector. Your priorities are clearly bias and deserve to be in question. Most of your articles are fair but this is really a preposterous entry without question.I would have honestly love to seen a review of some entry level projectors. Virtually everyone wants to know more about the bulbs, longevity, brightness, clarity, and other factors. Speakers are pretty much the no brainer of tech, they either work or they don't. If you want more channels just increase the blank.1 you have setup.
Even just building a really versatile box for future proof playback would have been sufficient. People tend to geek out on their displays in their own way.
FreckledTrout - Sunday, December 31, 2017 - link
@Crazyeyeskillah, I disagree. Any adults here who can afford an OLED TV would love a decent quality home theater which will cost at minimum $2000 but many people just don't know it. My nephew who is 28 has a good soundbar system and really didn't understand why I spend $2.5K on speakers and a receiver so we watched a movie, pearl harbor. When your company leans to duck the plane dropping bombs, priceless. Good home theater isn't something most people understand but once they have heard it they know what they are missing.SunnyHours - Wednesday, July 11, 2018 - link
There are other ways of having a decent speaker system without dishing out 500$US on a "home theater" receiver...especially if you don't plan on getting a decent set of Surround Sound speakers, which are not cheap...we are talking at least another 500$ up to 2000$ or more...and just for speakers.Instead, why not get a nice set of powered Bookshelf speakers like AudioEngine, Swan, HiVi, M-Audio, Kanto, Edifier and even Klipsch have good speakers that don't need a Receiver/Amplifier and generally have a 3.5mm cable so it's compatible with most anything, there are also some who do have RCA input(s). In this list you'll find all kinds of prices and whether you want a 2.0 speaker system or a 7.2 speaker system.
Also, another nice option if you have many things to connect, you can always just get a nice and simple 2.1 Sound System with a receiver (NAD, Yamaha, Denon, Harmon Kardon and others that don't come to mind should serve you well) and a pair of regular Bookshelf Speakers (Same brands mentioned before plus a couple others...just go to your biggest audio dealer close by and try them out before you buy them...if you can try both the receiver and speakers all the better!)
The 3rd option would be to go with Headphones!
If you want to head to head, speaker system vs Headphone system...of the same price, you'll always get way more sound for your money out of a simple headphone DAC/Amplifier combo and some Headphones or a DAC, headphone Amplifier and Headphones.
Whatever you do, please, do NOT encourage Bose. They sell overpriced stuff and it's just a really bad deal all around.
If you want more information and to ask questions to people who really know their stuff, head over to the Head-Fi Forums. They really specialize in headphones, but being Audiophiles usually means you'll also want good sounding speakers to be able to share it with others, and also to mix it up a little.
prerich - Friday, July 27, 2018 - link
Bravo!!!!